FET.18 nA1l'd edition!

Same as FET.18 BUT with additional Lanyard hole! Mods will always have lanyard with it.
Resin 
custom designs 
LED shines through front button 
18650 batterie powered open batterie system
Mosfet-board for most commen batterie safety (short, batterie direction, low batterie, button lock....)
78mm x 48mm x 26mm
Reset boro connectors

- Low Resistance Protection: When resistance is 0.08 ± 0.01Ω LED's flash 3 times and will not power the mosfet. This is also Short Protection.
- On/Off Function: When off, 5 clicks turns on and LED's flash 5 times. When on, 5 clicks turns off and LED's flash 5 times.
- Low Voltage: When battery is lower than 3.1 ± 0.1V LEDs flash 10 times and will not power the mosfet.
- Time Out Protection: If the mod is fired for 10 ± 1s the LED's will flash 8 times and will stop powering the mosfet.
- Reverse Polarity Protection. If the battery is around the wrong way the mod will fire.
- In Use: When powering the mosfet the LED will be on.
- Amp Limit: 46.67A (4.2v @ 0.09Ω)

IMG_4013

IMG_4008

IMG_4009

IMG_4011

IMG_4020 (1)

IMG_4019

IMG_4012

314612084_5848119021914901_4429237707584372494_n

314788757_5848119011914902_2394953976067411492_n

315022723_5848119208581549_4878943986845198663_n

315190727_5848119241914879_1814044929553448642_n

315217466_5848119108581559_4095609510562256066_n